Gambier Acres

Shared property / Fire Water

Fire Water

Fire tanks, pumps, and the backup supply from the pier.

Storage and backup routes

Tanks 5 and 6 sit near the pump shed, separate from the four cabin tanks, and normally fill with fresh water by gravity. Seawater from the pier is the backup.

Normal fire storage and two seawater backup optionsFresh water normally fills fire tanks 5 and 6 by gravity. The tanks supply the shed pump, which feeds the fire distribution. As a backup, a pump at the pier sends seawater uphill to a blue three-way selector. From there, option 1 tops up the fire tanks while they are being drawn down, and option 2 feeds the shed pump directly. The selector settings and hookups have not been demonstrated. Normal · fresh water by gravity Fresh-water supplyGravity fillFire tanks 5 + 6Near the pump shedShed pumpFire distributionPump at the pierSeawaterSeawater line uphill Backup · seawater from the pier Option 1 · top up the fire tanks Option 2 · feed theshed pump directly Blue three-way selectorSettings not yet shown

Swipe sideways to follow both routes.

Arrows show what each route does, not how to hook up hoses or set the selector. IMG_6745 · 00:15–01:44 IMG_6744 · 00:16–01:12

Tanks and shed equipment

As photographed during the visit. The shed’s treatment log and filter-flush note are with the maintenance records.

The posted start card

As written on the card · IMG_6747

  1. Prime Pump
  2. Switch to On
  3. Choke Left / Fuel Right
  4. Throttle Middle
  5. Pull Handle
  6. Choke Right, Throttle left

Unconfirmed Which of the two pumps the card applies to, and the hose and selector setup it assumes.

Source photograph